![16" Off Set - Shortbed Gooseneck Coupler 4" Rnd. - 73 lbs.](http://www.hitchescouplers.com/images/products/sb1-2-31632ab_32.jpg "16" Off Set - Shortbed Gooseneck Coupler 4" Rnd. - 73 lbs.")
16" Off Set - Shortbed Gooseneck Coupler 4" Rnd. - 73 lbs.
- 24,000 Gross Trailer Weight
- 9" Extended King Pin
- Self-Latching Coupler w/ Molded Hitch Guide & Release Cable
With PopUp "SB" Extended Couplers you get 9" or 16" more clearance between the truck cab & trailer nose and between the truck tailgate & trailer bulkhead, great for towing with a shortbed truck! You'll have more trailer swing and more room for hook-up. Fabricated with extra heavy wall tubing for maximum strength. All hardware, including coupler release cabling, is included. Installation is very easy and takes about 1/2 hour.
Missouri Residents - 5.475% sales Tax will be added.
All prices include Free UPS Ground Shipping to the lower 48 States.
An order received by
Extended Couplers
(Short Bed Couplers)
Nine Inch and Sixteen Inch Models
Available in Round Tube or Square Tube
All Models are Drilled for Safety Thru Pin
An Extra Nine Inches Right Where You Need It.
- Nine Inch offset between truck and trailer.
- More trailer swing.
- Easier hook-up.
- Fits standard trailer coupler tubes.
- Self-latching GN8 2-5/16" coupler.
- Precision coupler casting extends life of ball.
- 24,000 lbs. Gross Trailer Weight.
- Extra heavy wall tube for maximum strength.
- Includes coupler release cable and hardware.
- 100% complete.
Everyone who tows a gooseneck needs more clearance between the truck and trailer. You either need more trailer swing for maneuvering, or you need more room at the tailgate for hooking up. PopUp gives you a simple solution to this predicament.
Now Available With a Full Sixteen Inches of Offset For Even More Trailer Swing, Easier Hook-up
SB116 7/8" holes thru both sides - fits trailers with 4" ID round tube SB216 1" holes thru both sides - fits trailers with 4 1/2" ID Sq. tube SB316 1" holes thru both sides - fits trailers with 4" ID Sq. tube
WARNING!
THE SB116 MUST ONLY BE USED WITH A SAFETY THRU PIN
DO NOT use 16" models on 3-car wedge type trailers
These new PopUp Extended Coupler gives you an additional sixteen inches clearance between the truck cab and the trailer nose, and between the truck tailgate and the trailer bulkhead. This gives you more trailer swing and more room for hook-up. To make your towing experience better yet, this extended coupler is fitted with a PopUp GN8 self-latching coupler.
This coupler latches when the trailer is lowered onto the ball. It also has a molded hitching guide to make coupling easier. To uncouple, you simply pull a release cable located near the trailer jack handle. The GN8 coupler has a V-19 rating of 28,000 pounds.
These units are fabricated using extra heavy wall tubing for maximum strength. They are rated at 24,000 pounds gross trailer weight.
Short Bed Extended Couplers come with all necessary hardware and coupler release cabling. Installation takes about half an hour.
Each Extended Coupler is equipped with a GN8 Precision Cast Self-Latching Coupler. The couplers are drilled to accept a long shank padlock (padlock not included).
Model Chart
|
MODEL |
Fits |
|
SB1 |
Standard 4" I.D. Round Trailer Coupler Tube - With or Without Safety Thru-Pin |
|
SB2 |
4-1/2" I.D. Square Trailer Coupler Tube |
|
SB3 |
4" I.D. Square Trailer Coupler Tube |
|
SB116 |
Standard 4" I.D. Round Trailer Coupler Tube - Must Be Used With Safety Thru-Pin |
|
SB216 |
4-1/2" I.D. Square Trailer Coupler Tube |
|
SB316 |
4" I.D. Square Trailer Coupler Tube |
RSS Feed